3D printing material – SLS powder – plastic PA12, Monkey RePA12 45-20
2.5 L (~ 1.5 kg)
Technical data
Volume: 2.5l (~1.5kg)
Color: anthracite
Powder properties:
- Particle size: D [ V,90] Measured value: 88 μm
- Powder bulk density: 0.45 g/cm3
- Melting temperature: 185 °C
- Heat resistance: 180 °C
- Component density: 0.98 g/cm3
- E-modulus (tensile): 1,600 MPa
- Tensile strength: 45 MPa
- Elongation at break: 20%
The processed and absorption-optimized construction material
As an alternative to new SLS powders, we also offer a PA12 powder that has been specially optimized for small SLS appliances and specially processed by us; Monkey REPA 12 45-20. This is a processed PA12 powder material that is adapted and optimized by us in a specially designed process to enable the best properties for small SLS appliances.
This allows you to operate your small SLS systems economically and make a positive contribution to environmental protection at the same time.
100 % Ecological SLS powder
All our SLS powders are optimized for low thermal ageing, resulting in minimal waste. This reduces your costs and protects the environment.
Easy to process
All our materials are very free-flowing and can be optimally processed on SLS desktop systems (SinterIt, Sintratec, FormLabs, etc.).
High level of detail
All our 3D printing plastic powders are optimized for desktop SLS devices and allow the highest possible level of detail.
Very good pourability
For the best 3D printing results, the very fine powder must be applied as smoothly as possible. For this reason, we have optimized all our SLS powders to ensure the best possible flowability.
*Forwarding to the eBay store