3D printing material – SLS powder – plastic TPU, Monkey TPU 50
2.5 L (~1.5 kg)
Technical data
Volume: 2.5l (~1.5kg)
Color: black
Powder properties:
- Particle size: D [ V,90] Measured value: 96 μm
- Powder bulk density: 0.54 g/cm3
- Melting temperature: 136 °C
- Heat resistance: 91 °C
- Component density: 1.05 g/cm3
- Shore hardness A: 50
- Tensile strength (XY): 5.5 MPa
- Tensile strength (Z): 3.5 MPa
- Elongation at break (XY): 450%
- Elongation at break (Z): 250%
The very soft TPU is washable
Our thermoplastic polyurethane (TPU) powder shines with very spherical particle shapes, which offer high flowability and extremely low smoke development during processing.
The resulting SLS components offer a high degree of flexibility with an elongation at break comparable to injection-molded components.
The rubber-like TPU components are very soft and offer a pleasant feel (Shore hardness A ~ 50) and are therefore ideal for the production of shoe soles, orthopaedic components and bellows, for example.
While many competitor materials made of TPU suffer from the problem of hydrolysis, our TPU is very resistant and can be washed at 60°C without any problems.
This SLS powder material is ideal for use in selective laser sintering systems (SLS) with low laser power, such as SinterIt Lisa and SinterIt Lisa Pro, Sintratec S1, Sintratec S2 and Sintratec KIT as well as Formlabs Fuse 1, for example. It should be noted that adjusted parameters must be set. This is possible with SinterIt devices via Advanced Studio, for example. We will be happy to assist you in selecting the parameters.
100 % Ecological SLS powder
All our SLS powders are optimized for low thermal ageing, resulting in minimal waste. This reduces your costs and protects the environment.
Easy to process
All our materials are very free-flowing and can be optimally processed on SLS desktop systems (SinterIt, Sintratec, FormLabs, etc.).
High level of detail
All our 3D printing plastic powders are optimized for desktop SLS devices and allow the highest possible level of detail.
Very good pourability
For the best 3D printing results, the very fine powder must be applied as smoothly as possible. For this reason, we have optimized all our SLS powders to ensure the best possible flowability.
*Forwarding to the eBay store